Abstract
The experimental study focuses on the design, construction, and evaluation of a prefabricated roof component intended for implementation in housing. This modular component, which forms the roofed surface of the house, is made of conventional materials, including mortar and fired red bricks, the latter typically produced in the central plateau of Chiapas, Mexico. Its standard dimensions are 76 cm x 81 cm x 3 cm, with an average weight of 46 kilograms. Mechanical and thermal tests yielded significant results, demonstrating a robust structural capacity and favorable thermal performance of the prefabricated component. This positions it as a promising option for housing construction in the region. This innovative approach offers considerable potential to enhance the efficiency and sustainability of housing solutions in similar contexts, highlighting the importance of experimental research in optimizing materials and construction techniques within the housing sector.
Keywords: prefabricated, roof, deck, brickwork
References
Naciones unidas. (15th May, 2024). Las emisiones históricas del sector de la construcción, lo alejan de los objetivos de descarbonización. UN News: https://news.un.org/es/story/2022/11/1516722.
CEESCO. (29th April, 2024). Informe Nacional del Sector de la Construcción. CMIC. https://www.cmic.org.mx/ceesco/Documentos/Informe_Construccion/2023/Enero/Informe%20Nacional%20del%20Sector%20de%20la%20Construcci%C3%B3n%201-2-2023.pdf.
Peter, J. A.; Parshwanath, R. N.; Lakshmanan, N.; Sivakumar, P. A. (2010). novel precast roofing scheme for affordable housing. The Indian Concrete Journal, 2010, pp. 34–39
Serrrano-Lanzarote, B.; Cerdán-Castillo, V.; Ortega-Madrigal, L.; Almerich-Chulia, A. 2020. Use of reinforced ceramics for slabs in an autarchy period: Pathology and intervention strategies. Case Stud in Cons. Mat., 13, e00437. https://doi.org/10.1016/j.cscm.2020.e00437
Thanoon, W. A.; Yardim, Y., Jaafar, M. S.; Noorzaei, J. (2010). Structural behaviour of ferrocement–brick composite floor slab panel. Constr Build Mater, 24(11), pp. 2224–2230. https://doi.org/10.1016/j.conbuildmat.2010.04.034
Lakshmikandhan, K. N.; Harshavardhan, B. S.; Prabakar, J.; Saibabu, S. 2017.Investigation on Wall Panel Sandwiched With Lightweight Concrete. IOP Conf. Ser.: Mat Sci and Eng, 225, 012275. https://doi.org/10.1088/1757-899X/225/1/012275
Mahdi, S.; Sheikh, A. H.; Ali, M. S. M.; Elchalakani, M. 2022. Experimental investigation into the structural behavior of ultra-high-performance fibre-reinforced concrete box-celled composite panels. Comp Part C: Op Acc, 9, 100329. https://doi.org/10.1016/j.jcomc.2022.100329
Bernardi, P.; Cerioni, R.; Michelini, E.; Sirico, A. 2020. Transverse reinforcement optimization of a precast special roof element through an experimental and numerical procedure. Eng Struc, 203, 109894. https://doi.org/10.1016/j.engstruct.2019.109894
Siddiqui, I. (CSIR, Roorkee, Uttarakhand, India). 2011. Prefab Brick Panel System For Roofing/ Flooring. https://doi.org/10.13140/RG.2.1.3746.5840
Castañeda-Nolasco, G. Domotej. 2020. Tecnología para techos de vivienda de producción social asistida, 1st ed.; Universidad Autónoma de Chiapas: Tuxtla Gutiérrez, México; pp. 135-213
Vargas, A.; Silva, B. V.; Rocha, M. R.; Pelisser, F. 2014. Precast slabs using recyclable packaging as flooring support elements. J of Clean Prod, 66, pp. 92–100. https://doi.org/10.1016/j.jclepro.2013.10.059
Lima, P. R. L.; Barros, J. A. O.; Roque, A. B.; Fontes, C. M. A.; Lima, J. M. F. 2018. Short sisal fiber reinforced recycled concrete block for one-way precast concrete slabs. Constr Build Mater, 187, pp. 620–634. https://doi.org/10.1016/j.conbuildmat.2018.07.184
NMX-C-038-ONNCCE-2014. Organismo Nacional de Normalización y Certificación de la Construcción y Edificación – Determinación de las dimensiones de bloques, tabiques o ladrillos y tabicones, México: ONNCCE, 2014.
NMX-C-036-ONNCCE-2013. Organismo Nacional de Normalización y Certificación de la Construcción y Edificación – Resistencia a la compresión de bloques, tabiques o ladrillos y tabicones y adoquines, México: ONNCCE, 2013.
NMX-C-037-ONNCCE-2005. Organismo Nacional de Normalización y Certificación de la Construcción y Edificación – Determinación de la absorción de agua y absorción inicial de agua, México: ONNCCE, 2005.

This work is licensed under a Creative Commons Attribution 4.0 International License.
Copyright (c) 2025 Revista e-RUA
